WELDERS
Do you have weld guns?
Yes, we have a full line of servo and pneumatic weld guns to meet your needs.
Can you weld high strength steel?
Yes, Dengensha makes welders specifically designed for high strength steel given the entry of a proper weld schedule.
Do you have stock welders?
Yes, Dengensha carries most frequently purchased pedestal welders in stock.
What types of weld scopes do you offer?
Currently, we offer a table-top and portable types (WS-80 and WS-100) that measure weld current, weld cycle time, and peak current.
Do you offer integrated weld controls?
Yes, we offer integrated weld controls for most robot suppliers.
FEEDERS
Why do I need to supply 300 samples?
Dengensha feeders are custom-made to ensure the highest levels of efficiency and repeatability. To do that, 300 production samples are required by the manufacturing facility to be used in the design, build, and testing of a feeder. They are used to tune the vibratory bowl to determine how the fastener reacts to the selection process. Production samples allow each element in the selection and delivery system to be tested with the very same fastener that will be used in the customer’s production process. In this way, the customer will receive a feeder that works in the most efficient manner possible, from the first day of production to the last.
Do you stock spare parts for your feeders?
Yes, we stock not only spare parts for our feeders, but also consumables for welding applications; spare parts for welders, weld controls and weld guns; transformers; complete feeders for Japanese style square 6mm and 8mm nust; and pedestal welders.
What kind of accuracy can I expect from my Dengensha feeder?
Because we custom make your feeder with your production fasteners, our feeders offer the most reliability in the industry. With one or two exceptions for very special fasteners, you can expect a 99.9% repeatability from your Dengensha feeder.
Besides nuts, what else can be fed?
We can feed spacers, bolts and other special parts. Send us your dimensioned drawing or a few samples and we can usually quote you that same day.
What is the feeding rate for your feeders?
The feed rate varies depending on the type and size of fastener being fed. A standard 6mm nut feeder has a feeding rate of nearly 50 nuts per minute, while a larger fastener such as a 12mm hex nut can reach feeding rates of 25 nuts per minute.